Français
France
s'inscrire
Conseils d'eurolivre.fr
Livres similaires
Autres livres qui pourraient ressembler au livre recherché:
Outils de recherche
Livre conseillé
Actualités
Publicité
FILTRE
- 0 Résultats
prix le plus bas: 49,99 €, prix le plus élevé: 142,75 €, prix moyen: 76,53 €
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Livre non disponible
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - nouveau livre

2011, ISBN: 9783844317039

ID: 755896068

Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Bücher > Fremdsprachige Bücher > Englische Bücher Taschenbuch 21.10.2011 Buch (fremdspr.), LAP Lambert Academic Publishing, .201

Nouveaux livres Buch.ch
No. 30384257 Frais d'envoizzgl. Versandkosten, Livraison non-comprise
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Livre non disponible
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - nouveau livre

ISBN: 9783844317039

ID: 0440610a7ff1b2bf56ea4233a7b63b85

Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Bücher / Fremdsprachige Bücher / Englische Bücher 978-3-8443-1703-9, LAP Lambert Academic Publishing

Nouveaux livres Buch.de
Nr. 30384257 Frais d'envoiBücher und alle Bestellungen die ein Buch enthalten sind versandkostenfrei, sonstige Bestellungen innerhalb Deutschland EUR 3,-, ab EUR 20,- kostenlos, Bürobedarf EUR 4,50, kostenlos ab EUR 45,-, Sofort lieferbar, DE. (EUR 0.00)
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Livre non disponible
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - nouveau livre

ISBN: 9783844317039

ID: 730231252

Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Buch (fremdspr.) Bücher>Fremdsprachige Bücher>Englische Bücher, LAP Lambert Academic Publishing

Nouveaux livres Thalia.de
No. 30384257 Frais d'envoi, Versandfertig in 2 - 3 Tagen, DE (EUR 0.00)
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie
Livre non disponible
(*)
A. K. M. Nurul Amin#A. N. Mustafizul Karim#Mohamed Elhadie:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling - nouveau livre

ISBN: 9783844317039

ID: 163630058

Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling Buch (fremdspr.) Bücher>Fremdsprachige Bücher>Englische Bücher, LAP Lambert Acad. Publ.

Nouveaux livres Thalia.at
No. 30384257 Frais d'envoiMX (EUR 8.00)
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Machining Cost in Conventional and Hot Machining: Comparison and Modeling: Machining Cost in Room Temperature and Preheated  End-Milling Of AISI D2 Tool Steel:  Comparison and Modeling - Mohamed Elhadie, A.N. Mustafizul Karim, A.K.M. Nurul Amin
Livre non disponible
(*)
Mohamed Elhadie, A.N. Mustafizul Karim, A.K.M. Nurul Amin:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling: Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling - Livres de poche

2011, ISBN: 9783844317039

ID: 615367871

LAP LAMBERT Academic Publishing, 2011-10-20. Paperback. Used:Good. Buy with confidence. Excellent Customer Service & Return policy. Ships Fast. Expedite Shipping Available., LAP LAMBERT Academic Publishing, 2011-10-20

livre d'occasion Biblio.com
Ergodebooks
Frais d'envoi EUR 14.13
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.