. .
Français
France
Outils de recherche
s'inscrire

Connectez-vous avec Facebook:

S'inscrire
Mot de passe oublié?


Historique de recherche
Liste pense-bête
Liens vers eurolivre.fr

Partager ce livre sur…
Livre conseillé
Actualités
Conseils d'eurolivre.fr
Publicité
Annonce payée
FILTRE
- 0 Résultats
prix le plus bas: 133,30 €, prix le plus élevé: 154,82 €, prix moyen: 142,13 €
Powering Autonomous Sensors: An Integral Approach with Focus on Solar and RF Energy Harvesting - Penella-Lopez, Maria Teresa / Gasulla-Forner, Manuel
Livre non disponible
(*)
Penella-Lopez, Maria Teresa / Gasulla-Forner, Manuel:

Powering Autonomous Sensors: An Integral Approach with Focus on Solar and RF Energy Harvesting - livre d'occasion

ISBN: 9789400715721

ID: 14158037

Autonomous sensors transmit data and power their electronics without using cables. They can be found in e.g. wireless sensor networks (WSNs) or remote acquisition systems. Although primary batteries provide a simple design for powering autonomous sensors, they present several limitations such as limited capacity and power density, and difficulty in predicting their condition and state of charge. An alternative is to extract energy from the ambient (energy harvesting). However, the reduced dimensions of most autonomous sensors lead to a low level of available power from the energy transducer. Thus, efficient methods and circuits to manage and gather the energy are a must. An integral approach for powering autonomous sensors by considering both primary batteries and energy harvesters is presented. Two rather different forms of energy harvesting are also dealt with: optical (or solar) and radiofrequency (RF). Optical energy provides high energy density, especially outdoors, whereas RF remote powering is possibly the most feasible option for autonomous sensors embedded into the soil or within structures. Throughout different chapters, devices such as primary and secondary batteries, supercapacitors, and energy transducers are extensively reviewed. Then, circuits and methods found in the literature used to efficiently extract and gather the energy are presented. Finally, new proposals based on the authors' own research are analyzed and tested. Every chapter is written to be rather independent, with each incorporating the relevant literature references. Powering Autonomous Sensors is intended for a wide audience working on or interested in the powering of autonomous sensors. Researchers and engineers can find a broad introduction to basic topics in this interesting and emerging area as well as further insights on the topics of solar and RF harvesting and of circuits and methods to maximize the power extracted from energy transducers. Powering Autonomous Sensors: An Integral Approach with Focus on Solar and RF Energy Harvesting Penella-Lopez, Maria Teresa / Gasulla-Forner, Manuel, Springer

livre d'occasion Betterworldbooks.com
Frais d'envoizzgl. Versandkosten, Livraison non-comprise
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Powering Autonomous Sensors - María Teresa Penella-López
Livre non disponible
(*)

María Teresa Penella-López:

Powering Autonomous Sensors - nouveau livre

19, ISBN: 9789400715721

[ED: Buch], [PU: Springer-Verlag GmbH], Neuware - Autonomous sensors transmit data and power their electronics without using cables. They can be found in e.g. wireless sensor networks (WSNs) or remote acquisition systems. Although primary batteries provide a simple design for powering autonomous sensors, they present several limitations such as limited capacity and power density, and difficulty in predicting their condition and state of charge. An alternative is to extract energy from the ambient (energy harvesting). However, the reduced dimensions of most autonomous sensors lead to a low level of available power from the energy transducer. Thus, efficient methods and circuits to manage and gather the energy are a must. An integral approach for powering autonomous sensors by considering both primary batteries and energy harvesters is presented.Two rather different forms of energy harvesting are also dealt with: optical (or solar) and radiofrequency (RF). Optical energy provides high energy density, especially outdoors, whereas RF remote powering is possibly the most feasible option for autonomous sensors embedded into the soil or within structures. Throughout different chapters, devices such as primary and secondary batteries, supercapacitors, and energy transducers are extensively reviewed. Then, circuits and methods found in the literature used to efficiently extract and gather the energy are presented. Finally, new proposals based on the authors' own research are analyzed and tested. Every chapter is written to be rather independent, with each incorporating the relevant literature references. Powering Autonomous Sensors is intended for a wide audience working on or interested in the powering of autonomous sensors. Researchers and engineers can find a broad introduction to basic topics in this interesting and emerging area as well as further insights on the topics of solar and RF harvesting and of circuits and methods to maximize the power e -, [SC: 0.00], Neuware, gewerbliches Angebot, 243x164x15 mm, [GW: 415g]

Nouveaux livres Booklooker.de
Mersche GmbH
Frais d'envoiVersandkostenfrei, Versand nach Deutschland (EUR 0.00)
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Powering Autonomous Sensors - María Teresa Penella-López
Livre non disponible
(*)
María Teresa Penella-López:
Powering Autonomous Sensors - nouveau livre

19

ISBN: 9789400715721

[ED: Buch], [PU: Springer-Verlag GmbH], Neuware - Autonomous sensors transmit data and power their electronics without using cables. They can be found in e.g. wireless sensor networks (WSNs) or remote acquisition systems. Although primary batteries provide a simple design for powering autonomous sensors, they present several limitations such as limited capacity and power density, and difficulty in predicting their condition and state of charge. An alternative is to extract energy from the ambient (energy harvesting). However, the reduced dimensions of most autonomous sensors lead to a low level of available power from the energy transducer. Thus, efficient methods and circuits to manage and gather the energy are a must. An integral approach for powering autonomous sensors by considering both primary batteries and energy harvesters is presented.Two rather different forms of energy harvesting are also dealt with: optical (or solar) and radiofrequency (RF). Optical energy provides high energy density, especially outdoors, whereas RF remote powering is possibly the most feasible option for autonomous sensors embedded into the soil or within structures. Throughout different chapters, devices such as primary and secondary batteries, supercapacitors, and energy transducers are extensively reviewed. Then, circuits and methods found in the literature used to efficiently extract and gather the energy are presented. Finally, new proposals based on the authors' own research are analyzed and tested. Every chapter is written to be rather independent, with each incorporating the relevant literature references. Powering Autonomous Sensors is intended for a wide audience working on or interested in the powering of autonomous sensors. Researchers and engineers can find a broad introduction to basic topics in this interesting and emerging area as well as further insights on the topics of solar and RF harvesting and of circuits and methods to maximize the power e, [SC: 0.00], Neuware, gewerbliches Angebot, 243x164x15 mm, [GW: 415g]

Nouveaux livres Booklooker.de
Carl Hübscher GmbH
Frais d'envoiVersandkostenfrei, Versand nach Deutschland (EUR 0.00)
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Powering Autonomous Sensors - María Teresa Penella-López
Livre non disponible
(*)
María Teresa Penella-López:
Powering Autonomous Sensors - nouveau livre

19, ISBN: 9789400715721

[ED: Buch], [PU: Springer-Verlag GmbH], Neuware - Autonomous sensors transmit data and power their electronics without using cables. They can be found in e.g. wireless sensor networks (WSNs) or remote acquisition systems. Although primary batteries provide a simple design for powering autonomous sensors, they present several limitations such as limited capacity and power density, and difficulty in predicting their condition and state of charge. An alternative is to extract energy from the ambient (energy harvesting). However, the reduced dimensions of most autonomous sensors lead to a low level of available power from the energy transducer. Thus, efficient methods and circuits to manage and gather the energy are a must. An integral approach for powering autonomous sensors by considering both primary batteries and energy harvesters is presented.Two rather different forms of energy harvesting are also dealt with: optical (or solar) and radiofrequency (RF). Optical energy provides high energy density, especially outdoors, whereas RF remote powering is possibly the most feasible option for autonomous sensors embedded into the soil or within structures. Throughout different chapters, devices such as primary and secondary batteries, supercapacitors, and energy transducers are extensively reviewed. Then, circuits and methods found in the literature used to efficiently extract and gather the energy are presented. Finally, new proposals based on the authors' own research are analyzed and tested. Every chapter is written to be rather independent, with each incorporating the relevant literature references. Powering Autonomous Sensors is intended for a wide audience working on or interested in the powering of autonomous sensors. Researchers and engineers can find a broad introduction to basic topics in this interesting and emerging area as well as further insights on the topics of solar and RF harvesting and of circuits and methods to maximize the power e, [SC: 3.50]

Nouveaux livres Booklooker.de
buchversandmimpf2000
Frais d'envoiVersand nach Österreich (EUR 3.50)
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.
Powering Autonomous Sensors - María Teresa Penella-López
Livre non disponible
(*)
María Teresa Penella-López:
Powering Autonomous Sensors - nouveau livre

2011, ISBN: 9789400715721

[ED: Buch], [PU: Springer-Verlag GmbH], Neuware - Autonomous sensors transmit data and power their electronics without using cables. They can be found in e.g. wireless sensor networks (WSNs) or remote acquisition systems. Although primary batteries provide a simple design for powering autonomous sensors, they present several limitations such as limited capacity and power density, and difficulty in predicting their condition and state of charge. An alternative is to extract energy from the ambient (energy harvesting). However, the reduced dimensions of most autonomous sensors lead to a low level of available power from the energy transducer. Thus, efficient methods and circuits to manage and gather the energy are a must. An integral approach for powering autonomous sensors by considering both primary batteries and energy harvesters is presented.Two rather different forms of energy harvesting are also dealt with: optical (or solar) and radiofrequency (RF). Optical energy provides high energy density, especially outdoors, whereas RF remote powering is possibly the most feasible option for autonomous sensors embedded into the soil or within structures. Throughout different chapters, devices such as primary and secondary batteries, supercapacitors, and energy transducers are extensively reviewed. Then, circuits and methods found in the literature used to efficiently extract and gather the energy are presented. Finally, new proposals based on the authors' own research are analyzed and tested. Every chapter is written to be rather independent, with each incorporating the relevant literature references. Powering Autonomous Sensors is intended for a wide audience working on or interested in the powering of autonomous sensors. Researchers and engineers can find a broad introduction to basic topics in this interesting and emerging area as well as further insights on the topics of solar and RF harvesting and of circuits and methods to maximize the power e

Nouveaux livres Booklooker.de
Buchhandlung Kühn GmbH
Frais d'envoizzgl. Versandkosten, Livraison non-comprise
Details...
(*) Livre non disponible signifie que le livre est actuellement pas disponible à l'une des plates-formes associées nous recherche.

< Retour aux résultats de recherche...
Détails sur le livre
Powering Autonomous Sensors
Auteur:

Penella-López, María Teresa; Gasulla-Forner, Manel

Titre:

Powering Autonomous Sensors

ISBN:

9400715722

Autonomous sensors transmit data and power their electronics without using cables. They can be found in e.g. wireless sensor networks (WSNs) or remote acquisition systems. Although primary batteries provide a simple design for powering autonomous sensors, they present several limitations such as limited capacity and power density, and difficulty in predicting their condition and state of charge. An alternative is to extract energy from the ambient (energy harvesting). However, the reduced dimensions of most autonomous sensors lead to a low level of available power from the energy transducer. Thus, efficient methods and circuits to manage and gather the energy are a must. An integral approach for powering autonomous sensors by considering both primary batteries and energy harvesters is presented. Two rather different forms of energy harvesting are also dealt with: optical (or solar) and radiofrequency (RF). Optical energy provides high energy density, especially outdoors, whereas RF remote powering is possibly the most feasible option for autonomous sensors embedded into the soil or within structures. Throughout different chapters, devices such as primary and secondary batteries, supercapacitors, and energy transducers are extensively reviewed. Then, circuits and methods found in the literature used to efficiently extract and gather the energy are presented. Finally, new proposals based on the authors' own research are analyzed and tested. Every chapter is written to be rather independent, with each incorporating the relevant literature references. Powering Autonomous Sensors is intended for a wide audience working on or interested in the powering of autonomous sensors. Researchers and engineers can find a broad introduction to basic topics in this interesting and emerging area as well as further insights on the topics of solar and RF harvesting and of circuits and methods to maximize the power extracted from energy transducers.

Informations détaillées sur le livre - Powering Autonomous Sensors


EAN (ISBN-13): 9789400715721
ISBN (ISBN-10): 9400715722
Version reliée
Date de parution: 2011
Editeur: Springer-Verlag GmbH
147 Pages
Poids: 0,379 kg
Langue: eng/Englisch

Livre dans la base de données depuis 18.11.2007 19:38:21
Livre trouvé récemment le 04.08.2016 14:33:54
ISBN/EAN: 9400715722

ISBN - Autres types d'écriture:
94-007-1572-2, 978-94-007-1572-1

< Retour aux résultats de recherche...
< pour archiver...
Adjacent Livres